- Press coverage for the Cambridge iGEM team
- Biology at Cambridge
- Growth in liverworts of the Marchantiales is promoted by epiphytic methylobacteria.
- Genetic changes accompanying the domestication of Pea
- Hack an Air Freshener into an Remote Camera Trigger [DIY]
- Planon releases credit card-sized scanner for receipts
- Players control real microorgansims in 'biotic video games'
- CompuLab introduces its smallest, most energy efficient mini-PC to date
- Disposable microfluidic devices created using regular wax paper
- Mussels inspire self-healing sticky gel
- Pentel Airpen Mini now Compatible with Android Devices
- Built your own private network on the Go with Planex latest 3G Wireless Router
- PFU Fujitsu introduced the ultimate document scanner, the N1800
- Hydrogel used to create precise new biochemical sensor
- 80 Free and Awesome Photoshop Brushes
- Giant Knitted Squid
- Nitrogen fixation by marine cyanobacteria.
- Peptide signalling in the rhizobium-legume symbiosis.
- Auxin conjugates: their role for plant development and in the evolution of land plants.
- Illustrated anatomy of Gamera and foes
- Pickle Toothpaste
- Edible Giant Toasted Leafcutter Ants
- Flypaper Clock Eats Flies, Uses Their Bodies for Energy
- New E. chromi video
- Positions at Microsoft Research, Cambridge UK
- iGEM2011 recruitment
- Dynamics in the mixed microbial concourse.
- Making classic frequency counters into Nixie clocks
- The 4x4x4 LED Cube Using an Arduino
- Researchers develop genuine 3D camera
- Microbial Cell Factories: Engineering the cell surface display of cohesins for assembly of cellulosome-inspired enzyme complexes on Lactococcus lactis
- Presidential Commission reports on Synthetic Biology
- Cambridge presentation 2010
- iGEM2010 Jamboree
- Improved BioBrick components for bioluminescence
- Cambridge team at the iGEM2010 Jamboree
- University of Cambridge team wins iGEM synthetic biology competition
- Reversal of an epigenetic switch governing cell chaining in Bacillus subtilis by protein instability.
- App Magnets – upgrade your fridge with some app-etising icons
- Hackintosh In A Cardboard Box
- This Lung-On-A-Chip
- Pickle Adhesive Bandages
- USB Mix Tape
- Monster illustrations from Ultraman sonosheet book
- 15 Cool Stickers for your iPhone
- Bacteria are able to extend psuedo-legs and walk upright
- Japanese flower has the largest known genome
- Gibson Assembly Song
- DIYbio articles in Nature
- Gibson Assembly Song
- In Living Color: Bacterial Pigments as an Untapped Resource in the Classroom and Beyond
- Lego Shaped Ice Cube Tray
- Bacterial physiology: Bacillus takes the temperature
- Microfluidic approaches for systems and synthetic biology.
- GreenPhylDB v2.0: comparative and functional genomics in plants.
- The roots of a new green revolution.
- The Kno: A giant double-screen tablet to replace giant textbooks
- NVIDIA Fermi-Class Quadro GPUs
- Homemade laser microscope reveals water's murky secrets
- Verbatim launches Clip-It USB drive
- Synthetic Biology Faculty position
- SynBio2010 course in Synthetic Biology at Cambridge
- Synthetic Biology worth $4.5B by 2015
- Naked Scientist interview
- Royal Society: Future Technologies
- 2nd-generation GM traits
- NYT article about iGEM2009
- Synthetic Biology at the Wellcome Trust
- Giant Plant Cells
- Glass microbiology
- Endnote X3
- LEGO-sized hole punch
- Glowing Toyama Squid USB Memory Stick
- Green Pins
- Bacterial rainbow
- Synthetic operon for violacein production
- Cambridge team wins Grand Prize for iGEM2009
- The scatalog: E. chromi, pigment and poo
- Grand Prize for Cambridge iGEM2009 team
- Cambridge presentation at the iGEM2009 Jamboree
- Wellcome Trust iGEM2010 studentships
- Cambridge iGEM2009 team
- Synthetic Biology Project
- The iGEM Project
- RS Interface SynBio issue
- steam-powered dragon tin toy
- Magcloud: On Demand Magazine Printing
- RAE Synthetic Biology Report 2009
- Arduino Mega
- Phytocomp - new computing tools for plant science
- Computational Biology at Microsoft Research in Cambridge
- Open source hardware 2008
- www.synbio.org.uk news feeds
- Cambridge Network News
- iGEM 2008: Novice Bioengineers
- Plastic Logic e-Reader
- High Speed Photography using the Arduino
- Visitor's Guide to Cambridge
- Graduate Studies at Cambridge
- Emergence: a foundation for Synthetic Biology in Europe
Arduino Mega
Arduino Mega
From: http://arduino.cc/en/Main/ArduinoBoardMega
Overview
The Arduino Mega is a microcontroller board based on the ATmega1280 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Schematic & Reference Design
EAGLE files: arduino-mega-reference-design.zip
Schematic: arduino-mega-schematic.pdf
Summary
Microcontroller | ATmega1280 |
Operating Voltage | 5V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limits) | 6-20V |
Digital I/O Pins | 54 (of which 14 provide PWM output) |
Analog Input Pins | 16 |
DC Current per I/O Pin | 40 mA |
DC Current for 3.3V Pin | 50 mA |
Flash Memory | 128 KB of which 4 KB used by bootloader |
SRAM | 8 KB |
EEPROM | 4 KB |
Clock Speed | 16 MHz |
Power
The Arduino Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically.
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
The power pins are as follows:
- VIN. The input voltage to the Arduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.
- 5V. The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via an on-board regulator, or be supplied by USB or another regulated 5V supply.
- 3V3. A 3.3 volt supply generated by the on-board FTDI chip. Maximum current draw is 50 mA.
- GND. Ground pins.
Memory
The ATmega1280 has 128 KB of flash memory for storing code (of which 4 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library).
Input and Output
Each of the 54 digital pins on the Mega can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead()functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:
- Serial: 0 (RX) and 1 (TX); Serial 1: 19 (RX) and 18 (TX); Serial 2: 17 (RX) and 16 (TX); Serial 3: 15 (RX) and 14 (TX). Used to receive (RX) and transmit (TX) TTL serial data. Pins 0 and 1 are also connected to the corresponding pins of the FTDI USB-to-TTL Serial chip.
- External Interrupts: 2 (interrupt 0), 3 (interrupt 1), 18 (interrupt 5), 19 (interrupt 4), 20 (interrupt 3), and 21 (interrupt 2). These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
- PWM: 0 to 13. Provide 8-bit PWM output with the analogWrite() function.
- SPI: 50 (MISO), 51 (MOSI), 52 (SCK), 53 (SS). These pins support SPI communication, which, although provided by the underlying hardware, is not currently included in the Arduino language. The SPI pins are also broken out on the ICSP header, which is physically compatible with the Duemilanove and Diecimila.
- LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.
- I2C: 20 (SDA) and 21 (SCL). Support I2C (TWI) communication using the Wire library (documentation on the Wiring website). Note that these pins are not in the same location as the I2C pins on the Duemilanove or Diecimila.
The Mega has 16 analog inputs, each of which provide 10 bits of resolution (i.e. 1024 different values). By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the AREF pin and analogReference() function.
There are a couple of other pins on the board:
- AREF. Reference voltage for the analog inputs. Used with analogReference().
- Reset. Bring this line LOW to reset the microcontroller. Typically used to add a reset button to shields which block the one on the board.
Communication
The Arduino Mega has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. TheATmega1280 provides four hardware UARTs for TTL (5V) serial communication. An FTDI FT232RL on the board channels one of these over USB and the FTDI drivers (included with the Arduino software) provide a virtual com port to software on the computer. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the FTDI chip and USB connection to the computer (but not for serial communication on pins 0 and 1).
A SoftwareSerial library allows for serial communication on any of the Mega's digital pins.
The ATmega1280 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the I2C bus; see the documentation on the Wiring website for details. To use the SPI communication, please see theATmega1280 datasheet.
Programming
The Arduino Mega can be programmed with the Arduino software (download). For details, see the reference and tutorials.
The ATmega1280 on the Arduino Mega comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).
You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header; see these instructions for details.
Automatic (Software) Reset
Rather then requiring a physical press of the reset button before an upload, the Arduino Mega is designed in a way that allows it to be reset by software running on a connected computer. One of the hardware flow control lines (DTR) of the FT232RL is connected to the reset line of the ATmega1280 via a 100 nanofarad capacitor. When this line is asserted (taken low), the reset line drops long enough to reset the chip. The Arduino software uses this capability to allow you to upload code by simply pressing the upload button in the Arduino environment. This means that the bootloader can have a shorter timeout, as the lowering of DTR can be well-coordinated with the start of the upload.
This setup has other implications. When the Mega is connected to either a computer running Mac OS X or Linux, it resets each time a connection is made to it from software (via USB). For the following half-second or so, the bootloader is running on the Mega. While it is programmed to ignore malformed data (i.e. anything besides an upload of new code), it will intercept the first few bytes of data sent to the board after a connection is opened. If a sketch running on the board receives one-time configuration or other data when it first starts, make sure that the software with which it communicates waits a second after opening the connection and before sending this data.
The Mega contains a trace that can be cut to disable the auto-reset. The pads on either side of the trace can be soldered together to re-enable it. It's labeled "RESET-EN". You may also be able to disable the auto-reset by connecting a 110 ohm resistor from 5V to the reset line; see this forum thread for details.
USB Overcurrent Protection
The Arduino Mega has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.
Physical Characteristics and Shield Compatibility
The maximum length and width of the Mega PCB are 4 and 2.1 inches respectively, with the USB connector and power jack extending beyond the former dimension. Three screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
The Mega is designed to be compatible with most shields designed for the Diecimila or Duemilanove. Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, and ICSP header are all in equivalent locations. Further the main UART (serial port) is located on the same pins (0 and 1), as are external interrupts 0 and 1 (pins 2 and 3 respectively). SPI is available through the ICSP header on both the Mega and Duemilanove / Diecimila. Please note that I2C is not located on the same pins on the Mega (20 and 21) as the Duemilanove / Diecimila (analog inputs 4 and 5).
Photo of the Arduino Mega by SpikenzieLabs.